Extendable Eurorack Format Audio Mixer Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control, Input 3 is a two-channel stereo input with a common mute and level control, Input 4...
Dual Log / Lin VCA Curve infinitely adjustable from linear to exponential, LEDs for monitoring the CV signal, Attenuator for CV, Width: 6 TE / HP, Depth: 35 mm, Power requirement: +36 mA (+12 V) / -35 mA (-12 V)
Voltage Controlled VCA and Mixer Volume control per VCA, CV Attenuator with two-colour LEDs for monitoring bi-polar CV signals, Curve infinitely adjustable from linear to exponential, Each CV input is normalized to the...
6 Channel CV / Audio Mixer 6 Audio / CV inputs, 6 Mute / function inputs, 3 Bus outputs with routing switch per channel, Per channel linear LED sliders, Width: 18 HP, Depth: suitable for Skiff housing, Power...
Triple Active Attenuator Module 3 Modes per channel: active attenuator, bipolar attenuator, inverting attenuator, Width: 6 HP / HP, Depth: suitable for Skiff housing, Power requirement: +16 mA (+12 V) / -14 mA (-12 V)
Twice 1 x 3 Buffered Multiplier Module Output of the first multiple is normalised to the input of the second, Width: 2 HP, Depth: 39 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Mixer Module Dual 3: 1/6: 1 Unity Gain Mixer, Dual 3: 1 audio and CV mixer, Output of the upper mixer is normalized to the lower mixer, Input signals are neither amplified nor attenuated, Width: 2 HP, Depth: 29 mm,...
Inverter Module Quad CV inverter, Inverts incoming signals by 180 degrees, Outputs are normalized to the input below, Width: 2 TE / HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Passive Logic Module Various logic sources (triggers, gates, etc.) can be merged to form a logical OR combination output, Width: 2 TE / HP, Depth: 18 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
Logic Module Input Z is normalized to Y and Y is again to X, Bipolar voltage control of the logic types for section a and b with attenuators, Available logic types: AND (and), OR (or), NOR (not-or), XOR (exclusive or),...
Interface Module Interface for balanced line level (+4 dBu) signals, 4x 2-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path goes up to a nominal...
Balanced TRS connectors for the Audio I/O 1U Width: 16 HP, Depth: 38 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V) Note: Requires the Audio I/O 1U (Article Nr 440098 ) - not included, must be ordered separately...
Interface Module Interface for balanced line level (+4 dBu), 1x Balanced TRS 6.3 mm jack input path to Eurorack modular signal level, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
Interface Module Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
Attenuator Module Four times active attenuator, Suitable for unipolar or bipolar voltages, Each output is normalized to the next output, so submixes can be created, Width: 28 HP, Depth: 25 mm, Power requirement: +24 mA...
USB/DIN MIDI interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Sequencer synchronisation via run and reset outputs, Precision 0-10 V note pitch output with pitch bend & portamento CC...
USB Power Module Allows the supply of USB devices with 1A, Compatible with the TPS30 MAX and TPS80 backplanes, the TPS30MINI board requires an adapter, Width: 4 TE / HP
Multiple Module Twice 1 x 4 buffered multiplier module, Output of the first multiple is normalized to the input of the second, Width: 14 HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Eurorack Module Useful tools for Eurorack systems, Clock and random pulse source with adjustable rate, Analogue pink and white noise source, Sample/Track and Hold, Slew block with input and output, Width: 22 TE / HP,...
Headphone and stereo output for Eurorack systems High-quality headphone output for consumer and studio headphones, Width: 10 HP, Depth: 32 mm, Power requirement: +30 mA (+12 V) / -30 mA (-12 V)